= UCERF3 Fault System Solutions =

UCERF3 data is stored in the FaultSystemSolution file format. There are a variety of solution files available to users, and different applications require different files. These files can be used with the [wiki:UCERF3 ERFs].

== Individual Branches - Compound Fault System Solution ==

If you need results for one or more individual UCERF3 logic tree branches, you must use the UCERF3 Compound Fault System Solution file. This file can be downloaded here:

http://opensha.usc.edu/ftp/ucerf3_erf/full_ucerf3_compound_sol.zip

The file format is described [http://opensha.usc.edu/trac/wiki/FaultSystemSolution#CompoundFaultSystemSolutionFiles here]

If you need access to individual inversions for a single branch (UCERF3 averages 10 inversion runs per branch), you will need this files which contains rates.bin files for each run:

http://opensha.usc.edu/ftp/kmilner/ucerf3/2013_05_10-ucerf3p3-production-10runs/2013_05_10-ucerf3p3-production-10runs_COMPOUND_SOL_WITH_IND_RUNS.zip

If you are interested in how the UCERF3 waterlevel affects results, you may also be interested in [http://opensha.usc.edu/ftp/kmilner/ucerf3/2013_05_10-ucerf3p3-production-10runs/2013_05_10-ucerf3p3-production-10runs-bins.zip this] zip file which contains two files per inversion per branch.  The ''*_run*.bin'' files contain the rates for each rupture, similar to the previous file. The ''*_run*_noMinRates.bin'' files contain the inverted rates before the waterlevel was added back in. To recover the waterlevel, subtract values from ''*_run*_noMinRates.bin'' from the  ''*_run*.bin'' files. These files are in our [http://opensha.usc.edu/trac/wiki/FaultSystemSolution#Doublearraybinaryfile double array binary file format].

=== Single Solution Extraction Utility ===