| | 3 | UCERF3 data is stored in the FaultSystemSolution file format. There are a variety of solution files available to users, and different applications require different files. These files can be used with the [wiki:UCERF3 ERFs]. |
| | 4 | |
| | 5 | == Individual Branches - Compound Fault System Solution == |
| | 6 | |
| | 7 | If you need results for one or more individual UCERF3 logic tree branches, you must use the UCERF3 Compound Fault System Solution file. This file can be downloaded here: |
| | 8 | |
| | 9 | http://opensha.usc.edu/ftp/ucerf3_erf/full_ucerf3_compound_sol.zip |
| | 10 | |
| | 11 | The file format is described [http://opensha.usc.edu/trac/wiki/FaultSystemSolution#CompoundFaultSystemSolutionFiles here] |
| | 12 | |
| | 13 | If you need access to individual inversions for a single branch (UCERF3 averages 10 inversion runs per branch), you will need this files which contains rates.bin files for each run: |
| | 14 | |
| | 15 | http://opensha.usc.edu/ftp/kmilner/ucerf3/2013_05_10-ucerf3p3-production-10runs/2013_05_10-ucerf3p3-production-10runs_COMPOUND_SOL_WITH_IND_RUNS.zip |
| | 16 | |
| | 17 | If you are interested in how the UCERF3 waterlevel affects results, you may also be interested in [http://opensha.usc.edu/ftp/kmilner/ucerf3/2013_05_10-ucerf3p3-production-10runs/2013_05_10-ucerf3p3-production-10runs-bins.zip this] zip file which contains two files per inversion per branch. The ''*_run*.bin'' files contain the rates for each rupture, similar to the previous file. The ''*_run*_noMinRates.bin'' files contain the inverted rates before the waterlevel was added back in. To recover the waterlevel, subtract values from ''*_run*_noMinRates.bin'' from the ''*_run*.bin'' files. These files are in our [http://opensha.usc.edu/trac/wiki/FaultSystemSolution#Doublearraybinaryfile double array binary file format]. |
| | 18 | |
| | 19 | === Single Solution Extraction Utility === |
